BATTERY UPGRADE - 250,300,500 WATT COOLERS

• 250-300-500 Watt spare battery

• Weight 45lbs.

• Lead-Acid 24V drop in Battery!

• Run time 4-10 hours*

• Recharge 4-6 hours

Kit comes with Battery, fuse and power cord with splitter to add your existing battery. It is plug and play setup.

GO TO BUY AREA

* All ride times depend on terrain, speed, driver weight, tow weight and grade.

       The battery drops into the front end of your cooler and has a plug that allows you to plug the big battery directly into the ECM (Electric Control Module) and you can also add your existing battery to the system by plugging into the splitter provided. The cord can go over the dividing wall but it is highly recommended that you cut a notch or make a hole in the wall so that the cord is not smashed or cut by the lid. By going over the dividing wall you may cause a fire or electrical short!!

This is what the installed battery looks like with the cord not put through a hole yet.

The battery may also be placed in a Coolagon and running the power cord up to the front end.