-
How to identify a 50 series from a 51 series cooler?
-
About the back panel components and identifying components and removal
-
The configuration of the 51 series cooler and components
-
The wiring for the controller and what they do Part 2
-
All about the batteries and how to see if they are good
-
How batteries are wired in series to make more volts
-
The brake caliper, how to remove and reinstall & adjusting the brakes
-
How to check the brake switch
-
How to adjust the chain alignment
-
Clicking noise and chain tentioner/motor removal and replacement
-
All about the chargers
-
All about the circuit breaker
-
All about the controller wiring
-
Troubleshooting electrical problems, Part 1
-
Troubleshooting electrical problems, Part 2
-
Troubleshooting electrical problems, Part 3
-
What if it stops and starts suddenly or is eratic?
-
Removing the motor assembly, Part 1
-
Removing the motor assembly, Part 2
-
Reassembling the motor assembly, Part 3
-
Cooler humming, barely moving or real slow
-
What are causes of excessive heat in motor compartment?
-
How the coolers motor compartment is configured
-
Overview of most common problems
-
Breaking down rear end and left tire removal and reinstallation
-
Breaking down right tire, brake caliper, chain removal and adjusting hub
-
The hub and how to adjust the chain alignment
-
My cooler will not stop running
-
Causes of burning or melting wires, adjusting the brakes
-
Adjusting the brakes continued and the white jumper to slow down coolers
-
About changing throttles and the connectors, 50 and 51 series
-
About actually changing the throttles from new to old or vice versa
-
Changing a tire
-
Wires melting, other causes
-
If you find white powder inthe bottom of your cooler
-
Power Loss